XSV-800 Virtex Prototyping Board with 2.5V, 800,000-gate FPGA

XSV-800

Price: $1599.00
In Stock: No
Avail ---

Features:

XCV800 Virtex FPGA
XC95108 CPLD
Two 512K x 16 SRAM banks
PAL/SECAM/NTSC video decoder
110 MHz RAMDAC
10/100 Ethernet PHY
16 Mbit Flash RAM
100 MHz programmable oscillator
Two prototyping headers each with 38 general-purpose I/O
Four pushbuttons
DIP switch
Two LED digits
LED bargraph
20-bit stereo codec
stereo in/out jacks
VGA monitor port
mouse/keyboard PS/2 port
Single USB port (host or hub)
Parallel/serial port connectors
ATX power input or 9 VDC power jack

The XSV Board brings you the power of the XILINX Virtex FPGA embedded in a framework for processing video and audio signals. The XSV-800 Board provides an XCV800 FPGA with 800,000 gates. The XSV-800 can accept PAL, SECAM, or NTSC video with up to 9-bits of resolution on the red, green, and blue channels and can output video images through a 110 MHz, 24-bit RAMDAC. The XSV-800 can also process stereo audio signals with up to 20 bits of resolution and a bandwidth of 20 KHz. Two independent banks of 512K x 16 SRAM are provided for local buffering of signals and data.

The XSV-800 Board has a variety of interfaces for communicating with the outside world: parallel and serial ports, Xchecker cable, USB port, PS/2 mouse and keyboard port, and 10/100 Ethernet PHY layer interface. There are also two independent expansion ports, each with 38 general purpose I/O pins connected directly to the XCV800.

You configure the XSV-800 Board through a PC parallel port, serial port, or from a bitstream stored in the 16 Mbit Flash RAM. The Flash RAM can also store data for use by the FPGA after configuration is complete.